Motor 3 " features:

3'' types: asynchronous, bipolar; s.steel, external jacket; F class insulation; IP58 protection.
Threephase or singlephase with capacitor start; voltage, current, frequency, power and torque data according to international rules.
Coupling to body pumps according to NEMA STANDARDS; axial load to be coupled in compliance with hydraulic performances.

For voltage Ud different from those indicated in the table, the cable lengths must be multiplied by the ratio (Ud/220)² if monophase or (Ud 380) ² if threephase.
To avoid short circuits and overloads execute electrical plant of the electro pump with materials and protection according to actual rules.

Overloads, line drops over 3% can be avoided by using correct start system (max 20 starts/hour well distributed).
Used cables according to standards with good insulating features.

HP	KW	C.A./N	Lmm	Kg
0,5	0,37	1200	365	5,2
0,75	0,55	1200	400	5,8
1	0,75	1200	470	6,8

HP	KW	C.A./N	Lmm	Kg
0,5	0,37	1200	330	4,8
0,75	0,55	1200	365	5,2
1,5	1,1	1200	450	7,7

Rotation: clockwise looking at the pump, motor side. Install the pump into artesian wells DN 76mm for 3" types, DN 100mm for 4" and DN 150/210mm for 6" be sure that the electropump is completely filled (clean waters, max temperature 45°C).

If there is sand (max 40 g/m³) beed the well before installing the electrosubmersible pump.

Do not run the pump with closed discharge head for more than 2 minutes.

Before starting the electro submersible pump for the first time check that air is nomore coming out from discharge pipe, gradually open the flood gate then start.
Install control panels for electrosubmersible pump with level sound to prevent dry starts.
With high lift plant of electro submersible pump or with pression accumulations install anti water-hammer valves. If the unit doesn't work for a long period, frequently start the electro submersible pump.

Cable features:

MOTOR DATA (according to manifacturer)					CABLE
					Cable section in mm2- Copper
					4 x 1	4 x 1,5	4 x 2,5	4 x 4
					Cable length in meters from motor
Hp	KW	C.A./N	Lmm	kg	(drop tensionminore uguale 3% )
0,5	0,37	1200	365	5,2	35	55	90	140
0,75	0,55	1200	400	5,8	35	55	90	140
1	0,75	1200	470	6,8	30	40	65	105

MOTOR DATA (according to manifacturer)					CABLE
					Cable section in mm2- Copper
					4 x 1	4 x 1,5	4 x 2,5	4 x 4
					Cable length in meters from motor
Hp	KW	C.A./N	Lmm	kg	(drop tension minore uguale 3% )
0,5	0,37	1200	330	4,8	200	300
0,75	0,55	1200	365	5,2	200	300
1,5	1,1	1200	450	7,7	100	150

Technical Features 3"

 

Range 3''

Model B

Model C

Model D

Model M